To: | "amps@contesting.com" <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] UHF CONNECTORS AND CRIMP DIES |
From: | Gregory Beat <gregory.beat@comcast.net> |
Date: | Thu, 14 Nov 2013 07:22:03 -0600 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
There are TWO major Coaxial Cable Crimp connector Mfg. (RF Industries, Amphenol/Connex). RF Parts (California) sells BOTH product lines (connectors, dies, crimp tools). RF Industries (RFI) - UHF Connectors http://www.rfcoaxconnectors.com/product-categories-connectors-UHF.html When you look at the RFI Product Sheet for EACH coaxial connector, you are provided: Cable Group Type that connector is designed for (largely based on O.D. of coax cable); Coaxial Cable preparation (dimensions for proper insulation cutting); Crimp Dimension desired for Center and Outer conductor of coax cable. == Sent from iPad Air _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby |
---|---|
Next by Date: | Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., TexasRF |
Previous by Thread: | [Amps] All the recent UHF connector discussion, Larry Benko |
Next by Thread: | Re: [Amps] UHF CONNECTORS AND CRIMP DIES, Paul Christensen |
Indexes: | [Date] [Thread] [Top] [All Lists] |