All,
Here's what I could garner. These are just Amphenol crimp connectors straight
out of the Mouser catalog so it does not include overseas stuff or other
American vendors.
P/N Coax Die size(inches)
172128 LMR-100, RG174, 0.128
RG188A/U, RG316U
172171 RG316/U double shield 0.151
171142 LMR-400 0.429
171100 RG59/U, RG142 0.213
172214 LMR-200, LMR-240 0.213
RG8X
172135 Belden 7808A 0.255
172202 LMR-600 0.610
172102 RG-8, RG-213 0.429
172166 RG-214, LMR-400 0.429
172101 RG-59/U 0.255
172102H243 LMR-400/B9913 0.429
? Belden 9913 0.118
Notes
1) I did not locate a crimp tool for LMR-600.
2) I did not find a connector for 9913 but I have a note that 0.118 is the die
size.
3) Add 523- in front of the Amphenol P/N to get the Mouser number.
4) Notice that Amphenol makes different connectors for the same coax, RG-59
for example.
I have no explanation for this.
I actually made an Excel spreadsheet but I guess this reflector does not allow
attachments.
73 Hardy N7RT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|