ORIGINAL MESSAGE: (may be snipped)
On Wed, 27 Nov 2013 12:17:01 -0800, you wrote:
>
>I'm going to attempt to rewind a plate choke for my AL-1200, using the
>old form from the one I blew before. What is the recommend adhesive
>for this application? I've read about home-brew "Q-Dope"[1] - would
>that work? Other suggestions? I'd prefer something that's not going to
>be flammable when in use...
>
>73,
>
> ~iain / N6ML
REPLY:
Whatever you do be sure to test it for resonances very carefully. Not only
will the Q-dope affect resonance, so will the exact wire you use. Different
wires have different thickness and types of enamel and therefore different
inter-winding capacitance.
Personally, I'd just buy a replacement from Ameritron and be done with it.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|