Also, it is my understanding Ameritron has wound the coil with an odd number
wire size and if you wind it with an even number wire size with those same
quantity of turns you will have resonant points where you don't want them. So
make sure you use the same wire size as Ameritron uses and not something close
if you reLLY HAVE TO WIND YOUR OWN.
Lee, w0vt
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "iain macdonnell - N6ML" <ar@dseven.org>, "AMPS" <amps@contesting.com>
Sent: Friday, November 29, 2013 10:04:53 AM
Subject: Re: [Amps] Adhesive for plate choke?
Why? A replacement is only $20 and an improvement over early AL-1200's. It
took Ameritron 3 tries to get it right.
Carl
KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|