Amps
[Top] [All Lists]

Re: [Amps] High Voltage Transformer(s) wanted

To: "Carl" <km1h@jeremy.mv.com>,<amps@contesting.com>, <boatanchors@mailman.qth.net>
Subject: Re: [Amps] High Voltage Transformer(s) wanted
From: Paul Baldock <paul@paulbaldock.com>
Date: Wed, 01 Jan 2014 18:24:04 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
According to the American Website that trany is 1500V @ .5A, so the 1500V should give 2KV DC, but I need about .8A for this AM project.

You are right, the price is very good.

- Paul

At 05:28 PM 1/1/2014, Carl wrote:
Too bad you cant use 1800V as the one from the AL-811/811H is the best deal on the planet.

Carl
KM1H


----- Original Message ----- From: "Paul Baldock" <paul@paulbaldock.com>
To: <amps@contesting.com>; <boatanchors@mailman.qth.net>
Sent: Wednesday, January 01, 2014 5:51 PM
Subject: [Amps] High Voltage Transformer(s) wanted


High Voltage Transformer wanted:

I am looking for a transformer that when rectified and cap filtered will provide about 2KV at .8A or two transformers where one will provide 2KV at .5A and the second 2KV at .3A.


Thanks

- Paul

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6967 - Release Date: 01/01/14

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>