I think the build looks great and it may have been a plasma amplifier to
start. What caught my attention was the coil. Just looking at it one
wonders how it is going to tune below 12 or 15 meters, if that? It looks
like it is directly tied to the caps so nothing under the chassis. But, no
pictures of the bottom.
Paul
WD8OSU
On Wed, Jan 22, 2014 at 9:14 PM, Carl <km1h@jeremy.mv.com> wrote:
> Looks pretty decent from what I can see but it wont make it to 10M with
> that inductor.
>
> No bandswitch so he is either feeding it thru a .01 cap or a Henry 8K
> Ultra style of input balun. No under chassis pix is suspicious.
>
> There is plenty of room for a bigger inductor to get to 160 and larger
> vacuum caps. Heck he even started the layout for the second tube.
>
> The crafstmnship is excellent, wonder if it was an RF generator?
> ----- Original Message ----- From: "Col. Paul E. Cater" <
> paulecater@gmail.com>
> To: "Amps reflector" <amps@contesting.com>
> Sent: Wednesday, January 22, 2014 7:50 PM
>
> Subject: [Amps] Another eBay Goodie
>
>
> Have a look at the pictures for this RF deck. The seller states it
>>
>>
>>
>>
>>
>>
>> * "works broadband from 10 to 80 Mtrs
>> Band"http://www.ebay.com/itm/HAM-RADIO-10-80-MTRS-
>> 3CX3000A7-AMPLIFIER-RF-DECK-/201023804489?&_trksid=p2056016.l4276
>> <http://www.ebay.com/itm/HAM-RADIO-10-80-MTRS-3CX3000A7-
>> AMPLIFIER-RF-DECK-/201023804489?&_trksid=p2056016.l4276>*
>>
>> Paul
>> WD8OSU
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4259 / Virus Database: 3681/7025 - Release Date: 01/22/14
>>
>>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|