My QTH was the prototype for the original HFTA release.
Carl
KM1H
----- Original Message -----
From: "Zev Darack" <zevdarack@gmail.com>
To: <donroden@hiwaay.net>
Cc: <amps@contesting.com>
Sent: Wednesday, March 12, 2014 4:42 PM
Subject: Re: [Amps] been dead here
Don't guess. Use the HFTA program to figure out the optimum height for
your specific qth
73
Zev n2wks
On Wednesday, March 12, 2014, <donroden@hiwaay.net> wrote:
OK..... slow day ... To the Big Gunners out there ....
KT36XA tribander. what is the optimum height between ground level and
140m feet ?
A ring rotor at 70 feet, or all the way to the top ?
I'm on a knife edge of a ridge 1000 feet above the city... less than a
quarter mile from the drop-off over 270m degrees of rotation, so does
ground reflection even come into play ?
Don W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4336 / Virus Database: 3722/7184 - Release Date: 03/12/14
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|