No problem, just readjust the neutralization.
On 4/3/2014 1:33 PM, Carl wrote:
Its only in balance at the equator
----- Original Message ----- From: "RMorris" [1]<robrk@nidhog.net>
To: "Carl" [2]<km1h@jeremy.mv.com>
Cc: "Pete Smith N4ZR" [3]<n4zr@contesting.com>; [4]<Amps@contesting.com>
Sent: Thursday, April 03, 2014 2:51 PM
Subject: Re: [Amps] 3-500Zs inverted
But if it is Down Under and upside down, the the Coriolis effect would
return to the normal pattern.
Sent from my iPad
On Apr 3, 2014, at 13:43, "Carl" [5]<km1h@jeremy.mv.com> wrote:
Thats only for Down Under.
----- Original Message ----- From: "RMorris" [6]<robrk@nidhog.net>
To: "Pete Smith N4ZR" [7]<n4zr@contesting.com>
Cc: [8]<Amps@contesting.com>
Sent: Thursday, April 03, 2014 1:32 PM
Subject: Re: [Amps] 3-500Zs inverted
Don't forget to change the rotation of the fan and switch to the other
sideband.....
Sent from my iPad
On Apr 3, 2014, at 9:19, Pete Smith N4ZR [9]<n4zr@contesting.com> wrote:
I need to trouble-shoot my QSK system, which is built into my SB-220. Will
it do any harm to apply filament and plate voltages, but no drive, to the
3-500Zs in the inverted position for a few minutes at a time?
--
73, Pete N4ZR
Check out the Reverse Beacon Network at
[10]http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
--
73,
Vic, K2VCO
Fresno CA
[11]http://www.qsl.net/k2vco/
References
1. mailto:robrk@nidhog.net
2. mailto:km1h@jeremy.mv.com
3. mailto:n4zr@contesting.com
4. mailto:Amps@contesting.com
5. mailto:km1h@jeremy.mv.com
6. mailto:robrk@nidhog.net
7. mailto:n4zr@contesting.com
8. mailto:Amps@contesting.com
9. mailto:n4zr@contesting.com
10. http://reversebeacon.net/
11. http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|