[Top] [All Lists]

Re: [Amps] 3-400Z question

To: amps <>,
Subject: Re: [Amps] 3-400Z question
From: KA4INM <>
Date: Sun, 13 Apr 2014 14:21:44 -0400
List-post: <">>
Jeff, 3-400Z tubes will work very well in a 6m amplifier. The only precaution is try to test them before committing to all the work needed to build a new amplifier. If you plan ahead a bit, the amplifier could also accommodate a pair of 3-500Z tubes.
 Well wishes for a good outcome!

Wash the tubes, polish them up then take some good pictures, don't forget the tripod. (And use as camera)

 Gerald K5GW
In a message dated 4/13/2014 11:55:15 A.M. Central Daylight Time, writes:


I have a pair of Eimac 3-400Z tubes. Would these  tubes work well in a
grounded grid home brew amp for 6 meters SSB? I see  the tube specs on a
3-400Z is for class B or C. Just asking for some input,  thanks in advance.
  Ron  KA4INM - Youvan's corollary:
                Every action results in unwanted side effects.
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>