Amps
[Top] [All Lists]

Re: [Amps] Alpha 78 with 8874 Triodes

To: Chuck Curran <ccurran@wi.rr.com>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Alpha 78 with 8874 Triodes
From: Glen Zook via Amps <amps@contesting.com>
Reply-to: Glen Zook <gzook@yahoo.com>
Date: Wed, 23 Apr 2014 14:21:51 -0700 (PDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The GI-7b / GI-7bT has a plate dissipation of 350-watts per tube versus 
400-watts for the 8874.  The GI-7b and GI-7bT are pretty easy to make a socket, 
at least for HF.  A couple of years ago I built a 160-meter only linear 
amplifier using a pair of GI-7bT and the socket that I made for them is 
pictured in the article at

http://k9sth.com/uploads/160-meter_amplifier_article-1.pdf


So far, my Tempo-2001 linear amplifier, which uses a pair of the 8874 tubes, is 
still working fine.  But, if the tubes did go soft, I would seriously consider 
replacing the 8874 tubes with GI-7bT.
 
Glen, K9STH


Website:  http://k9sth.com
On Wednesday, April 23, 2014 2:48 PM, Chuck Curran <ccurran@wi.rr.com> wrote:
 
Hello the Group:



I am working on an Alpha 78 with three 8874 triodes, that are still in good
shape.  This particular amp was one that was built in late 1980, and the
interior is in like new condition.  However, it was one of those that was
built with the "SCRATCH PROOF" paint.  The catch is the paint broke down on
all of the Alpha amps that used it and is sticky like a coating of honey was
applied to all surfaces.



I was able to obtain a brand new front panel and I stripped and repainted
the sheet metal cover.  The cover turned out beautiful, just like the new
front panel is, using a color coordinated paint my wife picked out, I am
really bad at selecting complimentary colors!



So here is the question.  If an owner would want to run the amps for a long
time, you have to consider tube availability.  The 8874/3CX400A7 is listed
at $895 each at RF Parts, so I was wonder about re-tubing?



I searched the archives and found a discussion/argument from February of
2002.  There a GI-7B was being discussed, but no results were ever posted.
Now, 12 years later, have any on the list come across a tube that can be
considered an available replacement with new sockets, for the three 8874's
currently in place?



I would greatly appreciate any advice available,  Thank You



Chuck  W9KR

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>