Amps
[Top] [All Lists]

Re: [Amps] 1n5062 vs ?

To: <amps@contesting.com>
Subject: Re: [Amps] 1n5062 vs ?
From: "N4ZED" <N4ZED@COMCAST.NET>
Date: Mon, 26 May 2014 06:06:44 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
This link should work

https://dl.dropboxusercontent.com/u/51086952/MLA-2500/MLA-2500%20PS%20Board%
20Repair%20(12).jpg


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of N4ZED
Sent: Monday, May 26, 2014 3:09 AM
To: amps@contesting.com
Subject: [Amps] 1n5062 vs ?

Due to a re-assembly error/oversight (Diode too close to neighboring wire,
lesson re-learned) a diode and cap were damaged. I need to replace both.

The question is do I keep with the 1N5062 diode or go with something more
modern and replace them all?
Suggestions on replacement P/N?

https://www.dropbox.com/sh/13m1vyvftxadb3j/AADrWNE2INVEzlOvbdjcRU0Ba/MLA-250
0/MLA-2500%20PS%20Board%20Repair%20%2812%29.jpg


Ken
N4zed
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>