Hi David
I think you are right the tune and load capacitors of the Pi-L are near
fully meshed.
I shall try to add some padding doorknob to see if it helps.
73s
Eric - F1FLY
-----Message d'origine-----
De : Amps [mailto:amps-bounces@contesting.com] De la part de qrv@kd4e.com
Envoyé : samedi 7 mars 2015 16:52
À : f1fly
Cc : amps@contesting.com
Objet : Re: [Amps] Bandswitch arcing
Eric,
Have you considered an antenna tuner or modifying your antenna to
address the problematic load?
David KD4E
> It works fine but I have some arcing problems in the bandswitch when
> working at full power on 80 m.
>
> The antenna is a shorted dipole so I suspect it.
>
>
> 73s
>
> Eric - F1FLY
--
*David* KD4E
ARES-EC Bulloch County, Nevils, Georgia USA
Safe & Secure Search Engine: duckduckgo.com
Android for Hams: groups.yahoo.com/group/hamdroid Creative Tech:
groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|