On 07/04/15 04:00, "Jim Thomson" <firstname.lastname@example.org> wrote:
I have settled on two automatic transmission coolers in series. Each is
393x254x30 mm. Looks big hehe..
[....] With the correct flow rate into a GS35B, oil temps should not be an
provided that a correct size rad is used, along with an expansion tank...aka
de-gas bottle, plus pump for the job, etc, etc.
What is the de-gas bottle for?
I was going to vacuum the system out and charge it refrigeration-style.
Vacuum out all the air, purge with nitrogen, vacuum out again, fill with
oil, apply heat and hold vacuum on for 24 hours to de-gas, add +15psig
nitrogen and cap it and seal it.
Amps mailing list