Will try the 10-15115-1 choke for the AL-82 and that should work. Thanks to
all for your help.
Charles K5SUL
-----Original Message-----
From: Zev Darack <zevdarack@gmail.com>
To: Charles K Hardy <k5sul@aol.com>
Cc: amps <Amps@contesting.com>
Sent: Fri, Oct 2, 2015 2:30 pm
Subject: Re: [Amps] LK-500ZB
The one in my LK500ZC amp looks like this:
https://www.rfparts.com/filrfc30.html
or you can buy what I'm assuming is the identical part from the AL82 from
Ameritron: http://www.ameritron.com/Product.php?productid=10-15115-1
If what you meant was the Plate choke (common failure in LK-500 amps) then I
used this in mine: http://www.ameritron.com/Product.php?productid=10-15197
73,
Zev N2WKS
On Fri, Oct 2, 2015 at 2:40 PM, Charles K Hardy via Amps <amps@contesting.com>
wrote:
I am in need of a filament choke for my LK-500 amp. Schematic lists it as
RFC-1. Can anybody help me with this one?
Many thanks.
Charles K. Hardy K5SUL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|