[Amps] NEED SLUG TUNED CEAMIC OIL FORM

Amps

[Amps] NEED SLUG TUNED CEAMIC OIL FORM

To:	Amps@contesting.com
Subject:	[Amps] NEED SLUG TUNED CEAMIC OIL FORM
From:	wt8r--- via Amps <amps@contesting.com>
Reply-to:	wt8r@aol.com
Date:	Tue, 9 Feb 2016 16:34:49 -0500
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

 1/2" DIAMETER - quantity 9 OR 10 ....... RED SLUG if you have it, but not 
terribly important.  I mostly need the coil form.

Thanks in advance to the list  for your consideration.  

Dave, wt8r@aol.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] NEED SLUG TUNED CEAMIC OIL FORM, wt8r--- via Amps <=

Previous by Date:	Re: [Amps] help for parts...please, George T Daughters
Next by Date:	Re: [Amps] Shunt resistors for a bridge made of 6A10 diodes, Carl
Previous by Thread:	[Amps] Henry 2K-2, John Simmons
Next by Thread:	[Amps] 3cx800 tubes, Louis Parascondola via Amps
Indexes:	[Date] [Thread] [Top] [All Lists]