Amps
[Top] [All Lists]

Re: [Amps] Adjustable Regulated Screen Supply.

To: "'Paul Baldock'" <paul@paulbaldock.com>, <amradio@mailman.qth.net>, <boatanchors@mailman.qth.net>, <amps@contesting.com>
Subject: Re: [Amps] Adjustable Regulated Screen Supply.
From: "Doug Ronald" <doug@dougronald.com>
Date: Tue, 8 Mar 2016 15:46:40 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I have one in my garage that I'll never use. One 6146 looks gassy, but it
still works, and I have a spare 6146 available. I don't have a schematic,
but with point-to-point wiring, it's pretty easy to trace out. 

If yours needs a buddy, let me know...

-Doug Ronald
W6DSR

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Paul Baldock
Sent: Tuesday, March 8, 2016 12:52 PM
To: amradio@mailman.qth.net; boatanchors@mailman.qth.net;
amps@contesting.com
Subject: [Amps] Adjustable Regulated Screen Supply.


I have acquired a commercially made adjustable regulated screen supply. It
uses 2 x 6146s in parallel as a series regulator. It supplies 175mA from
225-325 Volts.

The serial number label says Trans Electronics, a Division of Burton Mfg of
California.. It is labeled Model RSL 317. However the back of the schematic
says A-100, and has a manufacturing date of 6-25-66 written on it. It looks
brand new and may never have been used, but test perfectly with excellent
regulation from no load to full load.

Is anybody familiar with this company or power supply?

- Paul  KW7Y


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>