Re: [Amps] Line voltage high.

[Bryan Swadener via Amps <amps@contesting.com>]

If a voltage change is needed, a buck transformer
(in the primary) won't waste power. A resistor will.
Use a transformer w/ a secondary current rating
AT LEAST as great as the amplifier's maximum current
requirement.

vy 73,
Bryan WA7PRC


   Date: Sat, 10 Dec 2016 13:27:24 -0500
From: "Ken Durand" <N4zed@comcast.net>
To: <amps@contesting.com>
Subject: Re: [Amps] Line voltage high.

I have re-measured the line voltage using my bench AC Fluke meter and the
line voltage is @ 244vac.
Note to self...pitch cheap meter. 

I will need to re-measure the filament voltage.

Ken
N4zed  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps