Amps
[Top] [All Lists]

Re: [Amps] home brew amp

To: Arnie Pfingst <arnie123@hotmail.com>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] home brew amp
From: Russ Williams via Amps <amps@contesting.com>
Reply-to: Russ Williams <hrd998cc@yahoo.com>
Date: Sat, 14 Jan 2017 03:36:30 +0000 (UTC)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Arnie,  thank you for posting this.  I am glad to hear there were others whose 
audio came into the neighbors stereos and scrambled TV reception.  I didn't 
have the opportunity to become a ham during my school years, so I went the CB 
route and built 11 meter sweep tube amplifiers from my high school junior year, 
1973 and forward, finally getting my novice ticket in 1985.  I am still 
building today and play with regens and am sorting out a 4-400A 6 meter amp I 
built a few years ago.73,RussKW6T


      From: Arnie Pfingst <arnie123@hotmail.com>
 To: "amps@contesting.com" <amps@contesting.com> 
 Sent: Friday, January 13, 2017 3:13 PM
 Subject: [Amps] home brew amp
   


I've been reading about how several people on here built an amp and how it 
works or doesn't work
I had my General Lic. before I graduated H.S (1972). I thought I was good with 
electronic design and knew everything about building stuff.

My station was all, Heathkit SB 300 receiver, SB 401 transmitter, SB 600 
speaker, monitor scope, antenna tuner, EV desk mic, and phone patch.

Not bad for a kid just out of High School. I thought the only thing missing was 
an amplifier. My dad suggested I build one, (he worked CW in the spark gap days 
his call was 9ccj)

so I did.

I found a pair of new 813 tubes on the old 40 meter swap net, and scrounged all 
of the the parts needed for a separate power supply that sat on the floor.

When it was done, I think it put out about 500 watts into a wire. I got my WAS 
and WATV in one weekend!!! (worked all stereos, and worked all TV) I was proud 
of my accomplishment,

it all worked. Shielding? i didn't have money for that so the tubes just sat on 
top on the chassis directly in front of a small blower. My dad was ready to

kick my ass for doing this after he had words with most of the neighbors. My 
point is to encourage people to continue building and TRYING things.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


   
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>