That's why I use primarily CW, to this day still the easiest mode for
dxing, even with low power and/or a slightly dirty amp it's not until someone
goes to slop bucket with that brown rice box...then turn down the volume or QSY!
Sent from my iPad
> On Apr 25, 2017, at 13:49, Bill Turner <dezrat@outlook.com> wrote:
>
> ------------ ORIGINAL MESSAGE ------------(may be snipped)
>
>> On Tue, 25 Apr 2017 15:20:10 -0400, W4TV wrote:
>>
>>
>> No amplifier should be dirty enough to prevent any amateur anywhere
>> from working within -3 KHz/+6 KHz of a USB signal (or -6 KHz/+3 KHz
>> of a LSB signal) unless that signal is literally next door (within
>> 1 km).
>
> REPLY:
>
> So as long as you are over 1 km away, anything goes? I know that's
> not what you mean, but it illustrates the problem of writing a spec
> that will satisfy everybody. Can't be done.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|