Amps
[Top] [All Lists]

Re: [Amps] Stripping Litz

To: amps@contesting.com
Subject: Re: [Amps] Stripping Litz
From: Daniel Artaud F6BRD via Amps <amps@contesting.com>
Reply-to: Daniel Artaud F6BRD <f1enp@yahoo.fr>
Date: Fri, 19 May 2017 16:18:11 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
And perhaps you can find something like that.

www.transfernow.net/296o4283w51h <https://www.transfernow.net/296o4283w51h>

This one was used at a 500 kW level in the VLF band.

It weights around 3 kg per foot!

Daniel F6BRD


Le 18/05/2017 à 21:57, donroden@hiwaay.net a écrit :
You could probably get pre-tinned lengths from BROADCAST ELECTRONICS
in Quincy, Il.    They use Litz on their AM broadcast transmitters.

Don W4DNR

Quoting Bill Turner <dezrat@outlook.com>:

------------ ORIGINAL MESSAGE ------------(may be snipped)

On Thu, 18 May 2017 09:59:27 -0700, someone wrote:


##  If a builder has no access to Litz wire,

REPLY:

eBay has over 1000 listings for Litz wire.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>