Amps
[Top] [All Lists]

Re: [Amps] LDMOS availability

To: Amps group <amps@contesting.com>
Subject: Re: [Amps] LDMOS availability
From: Bill Turner <dezrat@outlook.com>
Date: Sat, 10 Jun 2017 02:59:08 +0000
List-post: <mailto:amps@contesting.com>
------------ ORIGINAL MESSAGE ------------(may be snipped)

On Fri, 9 Jun 2017 20:56:33 -0400, Mark wrote:

>
>But the bottom line is simply that if the device conducts less than 180 
>degrees it is class C.  If any method at all can be used to increase 
>linearity this does not change the class of amplifier, it just improves the 
>linearity.

REPLY:

Nonsense.  If the amp conducts less than 180 degrees it can not
possibly be linear because the output in NOT a replica of the input.
That's the definition of "linear".  

If you "modulate" the bias to make it linear, it is no longer Class C.

Don't try to make things more difficult than they are. What you were
taught years ago was and is correct. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>