[Top] [All Lists]

[Amps] Ten-Tec Titan 10 Meter Input SWR

To: <>
Subject: [Amps] Ten-Tec Titan 10 Meter Input SWR
From: "Jim Thomson" <>
Date: Wed, 14 Jun 2017 10:10:10 -0700
List-post: <>
Date: Mon, 12 Jun 2017 00:38:47 -0400
From: "Gary Smith" <>
Subject: Re: [Amps] Ten-Tec Titan 10 Meter Input SWR

<I really appreciated the Amp Supply tuned 
input I put in the 4-1000A amp I made back 
in the 90's. It was pure simplicity and 
worked so well. I put one in a SB-220 as 
well with the same wonderful results.



##  I believe the amp supply tuned input board used arco compression
caps for both C1 + C2..and a fixed torroid for the coil.    The arco  
caps were padded on 160m.  I think the biggest arco I have is aprx  1600 pf. 
They ranged from  200 pf up to aprx 1600 pf.  Arcos have a limited min-max 
which is still ample for any tuned input.   Typ would be like 200-500 pf etc.  

##  It was ideal for folks with HB amps, and anything else.  Just tweak both 
for flat swr, then repeat for each band. 

Jim   VE7RF

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>