[Amps] Schematic for non factory 77 Dx two tube conversion

[Mike Keller <w1bnc52@gmail.com>]

I have an Alpha 77Dx s/n 2710 that was converted "in the field" by 
someone to a Two tube version.
Looking at the original 77 series manual, there are notations in the 
schematic for the changes necessary to add the second tube but a look 
under the RF deck of this amplifier shows a very different approach to 
the conversion such as a bifilar toroid instead of L2 and L12 and a 
string of 1n4007 diodes in the Post detector. Was there a factory 
revision that may not be in my manual or could it be that this was an 
aftermarket modification?
Tnx,

Mike

W1BNC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps