Good question Jim, dont know if they are still available.
I rarely use it as I have a low freq coupler for the LP-100A
I find it more useful as it will measure low power as well,
Merv K9FD/KH6
Subject: Re: [Amps] Amplifier for 630 meter band
<I was fortunate to run across a Bird 1KP slug, .45 to 2.5 MHZ 1KW
<Works fine on 475. They seem kind of rare have not found another
<one.
<Merv K9FD/KH6
## Do they still sell em ? I believe the last time I looked at both Birds
and Coaxial dynamics site, I could not
find the .450 to 2.5 mhz slugS. Back in the day, like 1975, they were
used for AM broadcast, but average power only.
## A scope across a T connector on a 50 ohm dummy load would also work,
provide the scope was calibrated.
## My array solutions Powermaster 20 kw coupler works from 500 khz to 30
mhz. Apparently it works quite well for
AM broadcast purposes. The AS 10 kw coupler works from 1.8 to 60 mhz... and
ditto with the AS 3 kw coupler, same deal,
1.8 to 60 mhz.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|