A related question. Once long ago I read that power cycles are very hard on
filaments. Is that also the case with soft starts, or does the soft start
reduce the thermal shock issues?
Kim N5OP
"People that make music together cannot be enemies, at least as long as the
music lasts." -- Paul Hindemith
> On Dec 26, 2017, at 21:08, Warren Volz <warren@warrenvolz.com> wrote:
>
> I’d recommend a step start with fuses. I have w7ry’s board in my sb220 and
> the fuses saved me from a bad tube once already.
>
> -Warren
>
>> On Dec 26, 2017, at 8:59 PM, Jim W7RY <jimw7ry@gmail.com> wrote:
>>
>> I recommend 10 Ohms. I use 2 resistors and 2 relays. There are fuses in
>> series with the resistors to protect them.
>>
>> Why would a cap blowing up cause an issue with a step start circuit?
>>
>> Again, I use 2 resistors and 2 relays on a small circuit board.
>>
>> See:
>>
>> https://www.ebay.com/itm/282765541853?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
>>
>> 73
>> Jim W7RY
>>
>>
>>
>>
>>
>> -----Original Message----- From: Arnie Pfingst
>> Sent: Tuesday, December 26, 2017 8:31 PM
>> To: amps@contesting.com
>> Subject: [Amps] Soft Start
>>
>> Once upon a time, i had a capacitor explode upon start up. I've heard
>> stories for and against adding a soft start circuit to my amplifiers.(Some
>> say 20 ohm resistors, and others say 30 or 40 ohm.) That and the price of
>> replacement tubes. In my case i have two TL 922a amps using 3-500z tubes.
>> Both set up on 240vac. What do you all have to say here. Thanks
>> Arnie
>>
>>
>>
>> Sent via the Samsung Galaxy S8 Active, an AT&T 4G LTE smartphone
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|