Re: [Amps] 3CX1500D3 Triodes

["Fuqua, William" <wlfuqu00@uky.edu>]

They will require more negative bias, input Z will be higher and will require 
more drive.

Not a very good direct replacement.  But can be done after a fashon.

73

Bill


________________________________
From: Amps <amps-bounces@contesting.com> on behalf of Bob Maser 
<bob.maser@gmail.com>
Sent: Monday, December 3, 2018 9:41 AM
To: amps@contesting.com
Subject: [Amps] 3CX1500D3 Triodes

I acquired a couple of 3CX1500D3 tubes and wonder if I can just plug them
in.  They are medium mu tubes.  The tube I have been
running in my homebrew amp uses 3CX1200D7 which are Hi mu triodes.  The
filament specs are the same and the plate HV specs are
similiar. My power supply has an output of 4200V which is within the specs
for both tubes.  Physically, the two tubes are identical and
the price was right.
Bob W6TR
_______________________________________________
Amps mailing list
Amps@contesting.com
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Famps&amp;data=02%7C01%7Cwlfuqu00%40uky.edu%7C75ee1c2a6d4442e4311908d6593d6977%7C2b30530b69b64457b818481cb53d42ae%7C0%7C0%7C636794517630473678&amp;sdata=ypKOITRR3txLLyCy2PwFl1mkmFMVe%2F0GECppu5Ss%2B9k%3D&amp;reserved=0
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps