[Top] [All Lists]

Re: [Amps] SB-220 input problem

Subject: Re: [Amps] SB-220 input problem
From: Jim <>
Date: Sat, 8 Dec 2018 22:46:37 -0600
List-post: <>
A 6' cable between the amplifier and the radio is minimum length. I use RG58 or RG8-X.

Then see what the SWR is.

Jim W7RY

On 12/8/2018 7:14 AM, N4ZR wrote:
My SB-220 is showing a relatively high input SWR on 10M (about 2.5:1) - which I just discovered this weekend!

Before I burrow into it, what's the most sensible approach? Acquire the capacitors for the input network and simply replace them all?  Or is there somewhere else I should be looking for my problem?

Amps mailing list
<Prev in Thread] Current Thread [Next in Thread>