Re: [Amps] Replacing padder caps on an Alpha 77DX/SX

["Gary Smith" <Gary@ka1j.com>]

Folks,

> Alpha could have made them easier to 
> access, they're right underneath the band 
> switch, screwed to the front RF panel and 
> the front panel of the RF deck is not 
> removable (this would have made access a 
> cinch). The only access to the front area 
> of the deck is from above and from the 
> left side. 

I should have said ETO instead of Alpha, 
even though we all know the current Alpha 
group did not make these old amps, I 
should have been more clear.

73,

Gary
KA1J

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps