[Top] [All Lists]

Re: [Amps] Bandswitch For Ten Tec Titan 425

Subject: Re: [Amps] Bandswitch For Ten Tec Titan 425
From: Martin Sole <>
Date: Wed, 1 May 2019 22:31:30 +0700
List-post: <>
Hi Ken,

I don't know that exact switch well but probably big enough to be possible that you can drill out the rivet then replace the contacts with some from an otherwise unsuitable wafer, think that's been standard practice on a number of  abused or poorly designed amps over the years. Unless of course its the wiper that's knackered!

A good rummage through some well stocked junque boxes should yield something suitable. I've likely got an old switch wafer here that would work for cannibalizing but you'd have to come get it :)

Martin, HS0ZED

On 30/04/2019 08:18, Ken Claerbout wrote:
I have a pristine 425 amp which has a destroyed back wafer on the
bandswitch. It's the wafer that switches in the 400 pf doorknob cap
and segments of the tune cap.

I'll keep searching, but I wonder if anyone has a part number or knows
where I might get a replacement?

Ken K4ZW
Amps mailing list

Amps mailing list
<Prev in Thread] Current Thread [Next in Thread>