Find an old Johnson Thunderbolt, they are almost free these days.
Carl
----- Original Message -----
From: "Joe Herdler via Amps" <amps@contesting.com>
To: <amps@contesting.com>
Sent: Monday, June 24, 2019 9:48 PM
Subject: [Amps] Need some amplifier advice
Hi All,
I am looking either for plans for an 80 meter mono-band amplifier
optimized for the RTTY portion of the band or an actual amplifier itself.
I want an all tube amplifier, including the power supply. I want no solid
state components at all in this amp. I would like it to be very
"overbuilt" so that when I run it at 500 watts RF power, it is just
idling. Of course, this is for RTTY, so it would be continuous duty at 500
Watts. I do not want to operate any higher than about 5oo watts.
I would like full metering. It does not need to be rack mounted, but I do
want a rugged chassis, and excessive ventilation to keep the tubes safe
and so that those tubes last a long time. I do want it to be fully
enclosed to keep four and two legged children safe from the lethal
voltages.
Any ideas or locations for plans would be greatly appreciated.
Thank you so much!
73,
Joe Herdler KB0TXC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|