K6STI has an upgraded free coil software version on his website
below.
Coil 3.72 is at the extreme bottom of left column.
Note, by left clicking on the ....AWG, u can toggle between AWG...and
decimal points of an inch.
It will handle awg up to a max of 0 gauge wire = .3249 inch. Min
AWG is 52 AWG = .008 inch.
In decimal points of an inch mode, it will handle tubing up to a max of
.5 inch OD.
By left clicking on the ..ditto marks below AWG.... u can toggle coil
diam, length, lead length, form thickness, between inches and mm.
Jim VE7RF
http://ham-radio.com/k6sti/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|