Jim,
Thanks for your link to check out. I
thought I'd followed the instructions for
proper bonding but as I have damage, I
need to review it.
Lost the USB on the K3s, had a spare
module to insert and now all is well with
it. Needed a new powered USB hub as well.
Is there any device made to protect USB
lines?
Thanks again,
Gary
KA1j
> On 11/30/2019 2:46 PM, Gary Smith wrote:
> > Guess Polyphasers
> > in the coax and a good ground isn't enough
> > to dodge the bullet.
>
> Yep. BONDING is critical. Inadequate bonding is a primary cause of
> damage from lightning. There's a fairly new ARRL book in the topic by
> Ward Silver, N0AX, to which I contributed. While you're waiting for it
> to arrive, study the slides for the talk I've done at Pacificon,
> Visalia, and to several ham clubs.
>
> http://k9yc.com/GroundingAndAudio.pdf
>
> 73, Jim K9YC
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|