Amps
[Top] [All Lists]

Re: [Amps] Monitor RF output on computer screen

To: "gregg.w6izt" <gregg.w6izt@gmail.com>
Subject: Re: [Amps] Monitor RF output on computer screen
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Sat, 7 Mar 2020 14:19:37 -0400
List-post: <mailto:amps@contesting.com>
Who makes the LP-100?

On Sat, Mar 7, 2020 at 12:48 PM gregg.w6izt <gregg.w6izt@gmail.com> wrote:

> LP100 etc. You have to remote the serial port over the network
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
> -------- Original message --------
> From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
> Date: 3/7/20 11:39 (GMT-05:00)
> To: Amps group <amps@contesting.com>
> Subject: [Amps] Monitor RF output on computer screen
>
> I have an Ameritron AL-1500 that is used remotely but have no way of seeing
> on the computer the relative power output.  Does anyone know of an RF power
> sampling device that can give me the relative power output indication on my
> computer screen?  I have such a device for my Acom with the Acom Director
> that interfaces with my 2000A but am at a loss on how to get something that
> can also show me what the AL-1500 is doing.  Please let me know how this
> can be done for my AL-1500 so the remote operator can be assured that it is
> working properly.
>
> Thanks,
>
> Herb, KV4FZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>