I used a pair, one on a Dentron DTR2000L (8877) and the other on a
ClippertonL
Both did well once the output was right at the tube.
----- Original Message -----
From: "Jim" <jimw7ry@gmail.com>
To: <amps@contesting.com>
Sent: Sunday, March 15, 2020 1:49 PM
Subject: Re: [Amps] LA100 tuner for input to amp (Not LP100)
It was written by Jerry Pittigner, K8RA now a Silent Key. His amplifier
was in one of the ARRL handbooks as a 3cx1200Z7 amplifier project.
I tried to use one on a 2ea 3CX800 amplifier and did not like its
performance.
Went to an input board with variable caps on both input and output.
Thanks
73
Jim W7RY
On 3/14/2020 5:37 PM, Robert wrote:
In the 2006 ARRL Handbook is article on HB 3CX1500D7 amp. This amp uses
a
LDG antenna tuner for the input circuit.
A modified LA-100Pro
It's not possible from the article to determine who the author is.
Who wrote the article? is first Question.
And if he's on list, still like the LA100 being used as tuned input??
seems like viable path for my next HB project.
73 W5AJ
Robert
Midland, Texas
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|