>"Also a 2nd HV fuse..in series with just one leg of the secondary of the
>plate xfmr."
Jim,
Just curious as to how you're implementing the HV fuse on the HV XFMR secondary
to prevent it from blowing during the initial inrush of the filter cap charging
(assuming C input). Obviously, step-start in the primary is going to be a big
factor but is that enough to keep a useful size fuse from blowing during the
initial inrush?
Paul, W9AC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|