Go to the alpha 87 ioGroups there in file section are several replacements ..
arrow electronics had hundreds for about $40 each just months ago
Jerry NY2KW
Sent from my iPhone
> On Aug 7, 2020, at 7:27 AM, Chris Wilson <chris@chriswilson.tv> wrote:
>
>
>
> 07/08/2020 12:07
>
> I have an Alpha 86 here with suspected TX / RX switching pin diode
> failure. The amps TUNE function is suspect, and switching between
> standby and operate gives a vey attenuated RX signal in standby mode.
> In TX it seems to operate, TUNE display aside, normally.
>
> The manual's schematic shows them as stud mounted UM4001CR devices. I
> am unable to source these, does anyone know of a current source for
> them please? Alternatively does anyone have instructions for
> conversion to using two vac relays? Fast CW is not required, and the
> noise of the vac relays not really a concern. Thanks.
>
> --
> Best Regards,
> Chris Wilson.
> mailto: chris@chriswilson.tv
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|