As the value of the shunt is not given in the manual, you would need to
put your DMM in series with the Yaesu meter and compare the readings.
73, Alek, VK6APK.
On 14/11/2020 11:35 am, John Keating wrote:
Does anyone on the list know what the voltage across the R3 shunt (in the
FL2100B plate current meter circuit) should be at a 90mA bias current? I trust
my DMM but not the Yaesu meter.
73, John
AI6LY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|