The 3-400's in my 2K will slowly work there way out of the sockets and
require pushing them back in to get the filament connections restored.
I've tried fixing the pins but I think socket replacement is in order.
Mike, W1NR
On 8/3/2021 8:35 PM, Donald Fox via Amps wrote:
> Many thanks for the replies, both on and off list. I'll take a harder look at
> the socket pins and connections. This is my 3rd Classic series console with
> 3-500's. The earlier 2 did not have such an issue.
>
> I'll report back what I find.
>
> Don
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|