[Top] [All Lists]

Re: [Amps] FW: FW: Triode Amps / options / tetrodes

To: "'Leigh Turner'" <>, <>
Subject: Re: [Amps] FW: FW: Triode Amps / options / tetrodes
From: "Peter Voelpel" <>
Date: Sat, 4 Dec 2021 09:10:24 +0100
List-post: <>
I don´t think that the 7F171RA is much cleaner then the 4CX3000A which is a
very similar tube also developed for low intermodulation.
What I see on the qrz page is the IMD at 1KW output and driven with the
super clean 4CX350FJ.
I am pretty sure that a 4CX3000A under this condition is doing equally well.

Peter, DJ7WW

-----Original Message-----
From: Amps [] On Behalf Of Leigh Turner

On the subject of capable HF linear amplifier tubes there is an interesting
ultra-linear tetrode made by NEC Japan designed specifically for low
intermodulation television broadcast service called the 7F71RA. This
substantial and not so commonly known tube with handles achieves impeccable
IMD performance in QRO linear SSB applications and I note that one such rare
NIB/NOS specimen is currently listed up on eBay as they do from time to

The 7F71RA is in a similar class to the Eimac 4CX3000A / 8169 tetrode but
with significantly cleaner 3rd and 5th order IM specs. The NEC tube would
make a fine QRO linear for teaming with an SDR transceiver and might be of
prospective interest to linear amplifier homebrewers.  JA1VKV has an
interesting page outlining his neat homebrew amp using this tube
with just a modicum of NFB to attain superbly clean linearity performance.
And that?s without applying any SDR based Pure Signal adaptive predistortion
linearization techniques.


Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>