Amps
[Top] [All Lists]

Re: [Amps] Pi Output load capacitors

To: Dennis W0JX <w0jx@yahoo.com>
Subject: Re: [Amps] Pi Output load capacitors
From: Jim Kinney <jimkinney@bellsouth.net>
Date: Wed, 13 Apr 2022 14:40:13 -0400
List-post: <mailto:amps@contesting.com>
Harbaugh has these $6 each.
Jim WE4S

⁣Get BlueMail for Android ​

On Apr 13, 2022, 1:59 PM, at 1:59 PM, Dennis W0JX via Amps 
<amps@contesting.com> wrote:
>I am building up an SB-220 - for 6 meters - from a box of parts I
>bought a few years ago. I got most everyting from a disassembled SB-220
>except for the plate and loading variable caps and some sheet metal.
>Apparently there were two different chassis used. The early version
>which I have, used a close spaced loading capacitor. The later version
>which I purchased in 1977 used a variable more like a transmiitng cap
>with wider plate spacing. Apparently Heath discovered that the early
>receiving type spaced variable was inadequate for higher SWR levels.
>For the plate tuning cap I have adapted a surplus 50 mmf variable that
>was used in the BC 312 tuning units. For the output loading cap, I am
>using a Johnson transmiting variable of about 150 mmf.
>I need to find two SB-220 circuit breakers as I did not get these. Does
>anyone know the amp rating and manufacturer of these breakers?
>73 Dennis W0JX 
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>