Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] 8877 - HV with heater, or later?

from [Rob Atkinson] [Permanent Link][Original]
To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] 8877 - HV with heater, or later?
From: Rob Atkinson <ranchorobbo@gmail.com>
Date: Tue, 24 Jan 2023 07:45:38 -0600
List-post: <mailto:amps@contesting.com> 
Just hit the filament on switch, go take a nap, walk the dog, drink a
cup of coffee, brush your teeth, put out the garbage, or any other
little 5+ minute task, then come back and hit plate on.  This has
always worked for me no matter what the tube is.

73

Rob
K5UJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Amps] test message - no reply needed, Victor Rosenthal 4X6GP
Next by Date:  [Amps] MKS brand 8877 test, Jim Barber
Previous by Thread:  Re: [Amps] 8877 - HV with heater, or later?, John Lyles
Next by Thread:  [Amps] 8877 Warm-Up Period, Byron Tatum
Indexes:  [Date] [Thread] [Top] [All Lists]