Wonder if anyone could identify the builder of this Amp.
Its a four 811a in a home brew amp. Has a few odd things like: 2
transformers which are likely 650V and a home would filament
transformer. Uses 4 diodes in a bridge which are 12 KV @ 500m. Has a
very nice cabinet. Came inoperabe but I found the bad part and now has
filament and fans working. Haven't tried keying it yet as my back is on
the fritz and need to move that from the shop into the operating room.
No measurement on the 3 meter positions. Plate, Grid, and Power
Output. Marked at 1350 V
It is marked on the Front Panel DSF 3/97 and I suspect that was the
builder.
This would more than likely be a builder from the pacific northwest.
Jay
WS7I
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|