Amps
[Top] [All Lists]

[Amps] New Command Tech. Commander power supplies ready.

To: Ham Amplifiers <ham-amplifiers@groups.io>, Amps Group <amps@contesting.com>
Subject: [Amps] New Command Tech. Commander power supplies ready.
From: gudguyham--- via Amps <amps@contesting.com>
Reply-to: "gudguyham@aol.com" <gudguyham@aol.com>
Date: Fri, 2 Feb 2024 12:44:19 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
The newly designed power supply boards I mentioned a few weeks ago are now 
ready.   These are a replacement power supply boards that fit the One and two 
tube HF Commanders and the one and two tube 6 meter amps.  The new technology 
boards are much more robust than the older original boards that have 
deteriorated over time.  The new boards have all of the features of the old 
boards plus 5000 hour 105 degree electrolytics, RF bypassing and series 
metering resistors that should not drift and fail over time!!!   I have been 
unable to rebuild original boards due to trace’s flaking off the board and had 
to do something to save these amps!  Contact me at gudguyham@aol.com for 
further information.  Boards are built and tested and ready. Limited supply at 
this time as more will be on the way.  Thanks, Lou


Sent from the all new AOL app for iOS
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] New Command Tech. Commander power supplies ready., gudguyham--- via Amps <=