Amps
[Top] [All Lists]

Re: [Amps] 10 meter amp coil

To: john@kk9a.com
Subject: Re: [Amps] 10 meter amp coil
From: "Steve, NR4M" <steve@nr4m.com>
Date: Fri, 11 Apr 2025 22:01:28 -0400
List-post: <mailto:amps@contesting.com>
Hi John,
Just looked at the link. 
I can deal with this!
Not sure where I was before.

Thank you 

Steve NR4M 
Sent from my iPhone

> On Apr 11, 2025, at 9:05 PM, john@kk9a.com wrote:
> 
> The archive search goes back to 1997 (not monthly) if you use the search
> string at the top:
> http://lists.contesting.com/archives//html/amps/
> 
> John KK9A
> 
> 
> Steve Bookout NR4M wrote:
> ]
> Hello all,
> 
> I'm building a 10 meter mono band amp for my m/m contest station here in
> VA.
> 
> What is the group consensus on what diameter the conductor for the plate
> tank circuit?  I tried looking in the archives, but it's not the best
> for searching (it's monthly).
> 
> I'm thinking 3/8 inch should be fine.  Half inch is starting to get
> 'stupid big', IMO.
> 
> Will be an 8877 @ 4kv.  Class of operation: not sure of yet.  12 volt
> bias is probably fine.  I ONLY run CW.
> 
> And, looking for a filament transformer for the 8877.  Anyone have one
> that is not in use?
> 
> 73 de Steve NR4M
> 
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>