Hi Cecil,
With a 2KW minimum rating for the rotary joint, you might not
want to specify a type "N" connector. Depending on what
frequency you plan to operate this system on, either a PL259 or a
7/16" DIN connector would probably be a better choice. The issue
is mostly RF curent vs center pin size.
73, Eric N7CL
>From: cecil gates <dukef28@hotmail.com>
To: <antennaware@contesting.com>
>Date: Thu, 08 Jul 1999 10:53:49 PDT
>
>I am looking for a pair of selsyens, 110 v. Also a 50 ohm coax
>rotary coupler pl259 or N, 2 kw min.
>
>al7qh cecil
>
>dukef28@hotmail.com
>
--
FAQ on WWW: http://www.contesting.com/antennaware-faq.html
Submissions: antennaware@contesting.com
Administrative requests: antennaware-REQUEST@contesting.com
Problems: owner-antennaware@contesting.com
|