Antennaware
[Top] [All Lists]

Re: [Antennaware] dBi conversion to Antenna Factor

To: "Andy Ikin" <andy@wellbrook.uk.com>,"Terry Conboy" <n6ry@arrl.net>
Subject: Re: [Antennaware] dBi conversion to Antenna Factor
From: "Guy Olinger, K2AV" <olinger@bellsouth.net>
Date: Wed, 21 Nov 2007 09:29:35 -0500
List-post: <mailto:antennaware@contesting.com>
Andy, Terry...

"Check out this web page
http://www.djmelectronics.com/articles/emc-antenna-parameters-p3.html
which has a detailed discussion of antenna factor.  Note that their
definition of antenna factor (AF) is the reciprocal of yours (which
they define as the "effective length", h-sub-e)."

If that doesn't give one a sense of clarity drowned in unmanageable 
specificity......

Without excruciating attention to detail in the close environment, and out in 
an uncluttered antenna range, it is nearly impossible to get these formulas to 
show up in actual measurements beyond "rough correspondence" in orders of 
magnitude.

Beyond that, for mere mortals, in terms of actual usefulness hearing stuff at 
the home station with all the miscellaneous conductors and noise around, all 
that one can sometimes say is that "I could hear him on one antenna and not as 
well on the other."

73, Guy.




_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware

<Prev in Thread] Current Thread [Next in Thread>