When I worked V44KAO I asked for his power and he sent it to me.
Somehow I didn't think he was running 6K (BK). But I also heard a
few other stations sending 5NN K. Within the same frame of
thought of this discussion one could conceiveably argue whether
the station was saying (implying?) 599 kilowatt or 599 go ahead!
The difference, as I see it, is in knowing who is at the other end.
Most of us probably know that P49V is "in the contest." Do we
really know the intent of V44KAO (a resident of St Kitts?) Was he
"in the contest?" If so, then he probably has not followed the
rules. Was he just handing out Qs, only making "contest Qs" when
asked? If so, then he did not break any rules.
I first heard ENN a couple years ago or so and I just figured it
was only a matter of time, having already heard the 5 being
shortened to H before, and even S in some instances.
Here's a twist on that: When I was at PJ8Z for CQ WW SSB I would presume
that I hardly ever said "five-nine 8." It was more likely
along the lines of "fi-nine 8."
So is it possible that this was not a valid exchange?? :-) :-)
73 Mike N0BSH
n0bsh@aol.com
>From k2mm@MasPar.COM (John Zapisek K2MM) Sat Feb 25 01:37:14 1995
From: k2mm@MasPar.COM (John Zapisek K2MM) (John Zapisek K2MM)
Subject: An Exchange Student?
Message-ID: <9502250137.AA20884@greylock.local>
I thought it'd be useful to see what the rules actually say, so I FTP'd
/pub/hamradio/arrl/infoserver/msd/dx.rls from oak.oakland.edu. Here are
some relevant excerpts:
> 6) Contest Exchange: (B) DX stations send signal report and power
> (three-digit number indicating approximate transmitter output power).
>
> 8) Miscellaneous: (A) Call signs and exchange information must be
> received and logged by each station for a complete QSO.
>
> 9) Reporting: (B) Logs must indicate times in UTC, bands, mode, calls,
> complete exchange sent, complete exchange received and QSO points.
Rule 6B requires a signal report, but not necessarily in RS(T) format. I
think "NN" could be considered a signal report. So could "awesome signal",
"five by loud", or "dead full clobbering"!
Re rule 8A: I looked but didn't find anything about sending exchange info,
just receiving and logging. Also didn't find anything about a penalty for a
QSO not being "complete". Hmmm.
Rule 9B requires that you log what you sent. If the V44 didn't send his
power but his logs say he did, has he falsified his log?
Duh. --John/K2MM
>From George Cook <george@epix.net> Sat Feb 25 01:59:24 1995
From: George Cook <george@epix.net> (George Cook)
Subject: K3ANS score ARRL CW DX
Message-ID: <Pine.SUN.3.91.950224205801.24234B-100000@grape.epix.net>
On Wed, 22 Feb 1995 fish@crl.com wrote:
> George,
>
> Would you mind giving us a breakdown of your station?
>
> You guys beat me in every pile up from N4RJ.
>
> 73
>
> ---
> Bill Fisher, KM9P - Concentric Systems, Inc.
Breakdown for ARRL CW DX Contest:
160 meters: Antennas: Inverted V at 65' and inverted ground plane at
70'
level on 105' tower with top loading and 8 active radials.
80 meters: Antennas: 3 element wire yagi aimed north east to Europe and
over
the pole to eastern Asia. Inverted ground plane at 50' level on 80' tower
with top loading and 8 active radials, but 3.5:1 SWR, so not effective yet.
Center fed 135' zepp at 50' high.
40 meters: Telerex 40M329 3 element yagi at 108'. Center fed zepp (described
above). 3 element wire yagi aimed north east to Europe and over the pole to
eastern Asia, suspended under the 80 meter wire yagi.
20 meters: Hygain 205CA, 5 element yagi at 117' high, sharing same
rotator and
mast as the 40 meter Telerex.
15 meters: Hygain 155CA, 5 element yagi at 90' high.
10 meters: home brew W2PV design, 6 element yagi at 80' high, sharing same
rotator (broken) and mast as the 15 meter yagi.
10, 15, 20 meter tribander, Mosley TA-33 yagi.
Equipment:
Station 1: Icom IC-761, Ameritron AL-1200.
Station 2: Ten Tec Omni VI, Ten Tec Titan.
Station 3: Icom IC-765, Heath SB-220.
Station 4: Icom IC-761, Drake L-4B.
Station 5: Icom IC-737, Drake L-4B with bad finals, Ameritron AL-811
with
good finals.
5 computers in K1EA CT 9.20 network.
Glad to share the info. Of course this was temporary set up as the operators
brought over their rigs. What was your station? We heard too much of
you
too.
73, Bill, K3ANS >>
*************************************************
* George Cook AA3JU Bangor, PA FN21 *
* george@peach.epix.net AA3JU@N3IQD.EPA.USA.NA *
*************************************************
>From scott@6.microbbs.us.com (Scott Lieberman) Sat Feb 25 01:45:24 1995
From: scott@6.microbbs.us.com (Scott Lieberman) (Scott Lieberman)
Subject: He sends QRP R5. Now how do you log 1/2 watt?
Message-ID: <4b4_9502241804@microbbs.us.com>
W> He sends QRP R5. Now how do you log a 1/2 watt?
W> I put down 1, but really now, what is he supposed
W> to send when he's running flea power?
I remember working an ARRL CW DX contest from New England (I think it was at
W1RR), and working a JA who gave "200mw" as his power.
--
|Fidonet: Scott Lieberman 1:143/6
|Internet: scott@6.microbbs.us.com
|
| Standard disclaimer: The views of this user are strictly their own.
| via a2i communications gateway (408) 293-9010 logon=guest for info!
>From Frank Conte <frank@gti.net> Sat Feb 25 03:11:33 1995
From: Frank Conte <frank@gti.net> (Frank Conte)
Subject: No subject
Message-ID: <Pine.SUN.3.90.950224221002.25954A-100000@gti.gti.net>
signoff
>From Frank Conte <frank@gti.net> Sat Feb 25 03:12:34 1995
From: Frank Conte <frank@gti.net> (Frank Conte)
Subject: No subject
Message-ID: <Pine.SUN.3.90.950224221154.25954B-100000@gti.gti.net>
signoff
>From w7zrc@micron.net (Rod Greene) Sat Feb 25 03:09:00 1995
From: w7zrc@micron.net (Rod Greene) (Rod Greene)
Subject: Chairs
Message-ID: <m0riCss-000QXuC@mis01.micron.net>
After reading the postings about the chairs, I was surprised to NOT see
anything about a good quality secretarial chair. I have been using one for
contests and find it works very well for me. Seems like the job duties of a
secretary would be close to the conditions of a contest operator (long hours
at a keyboard). The one I have I purchased used for a song. You might
check your used office furniture dealers.
BTW, for a look at an exotic Herman Miller creation, check out page 59 in
the March issue of Wired. Supposedly it was designed with the help of a
"team of ergonomists, orthopedic specialists and physical therapists". Price
range of $765 to $1,225. Maybe if I win the Lotto!
No comments about my choice of reading material... Rod W7ZRC
............................................................................
w7zrc@micron.net Rod Greene W7ZRC Boise ID DN13UN
----------------------------------------------------------------------------
>From Jerry Crawford <z008807b@bcfreenet.seflin.lib.fl.us> Sat Feb 25 12:45:14
>1995
From: Jerry Crawford <z008807b@bcfreenet.seflin.lib.fl.us> (Jerry Crawford)
Subject: CT spot transfer
Message-ID: <Pine.3.89.9502250720.A22531-0100000@bcfreenet.seflin.lib.fl.us>
Planning to do a multi single with CT networked. Is there a way
to make a spot from the spotting rig that will show up in the
ANNOUNCE window of the running rig without putting it out on
packet? Of course it could be sent with ALT-G, but then the
info has to be manually put in radio etc.
BTW, if you are using CT 9.15 and not using DVP, make sure you
do not hit Alt-P while trying to get Alt-O or you will get dumped.
73, K7UPJ
Jerry Crawford
z008807b@bcfreenet.seflin.lib.fl.us
>From Trey Garlough <GARLOUGH@TGV.COM> Sat Feb 25 15:10:50 1995
From: Trey Garlough <GARLOUGH@TGV.COM> (Trey Garlough)
Subject: CT spot transfer
Message-ID: <793725050.729392.GARLOUGH@TGV.COM>
> Planning to do a multi single with CT networked. Is there a way
> to make a spot from the spotting rig that will show up in the
> ANNOUNCE window of the running rig without putting it out on
> packet? Of course it could be sent with ALT-G, but then the
> info has to be manually put in radio etc.
This sounds like an excellent question for the CT users mailing list.
Perhaps you should take this thread over there.
--Trey, WN4KKN/6
|