On Sat, 7 Jun 2003 12:47:55 -0500, Tree <tree@kkn.net> wrote:
>Essentially, these radios will take your 3 conversion R4-C and turn
>it into a 4 conversion six meter radio. It does this by converting
>the 50 MHz input into a 20 meter signal.
_________________________________________________________
I would strongly recommend *not* converting to 20 meters or any other
ham band. The reason is possible leakage of a 20 meter signal through
the converter. When you hear a weak signal, you want to be sure it's
a six meter signal and not leakage from the ham band. Convert to 6, 8
or 9 MHz instead, or some other suitable frequency.
73, Bill W7TI
|