hi Marco,
One of my KR800's had a loose belt - a small black rubber
belt inside the control box had to be replaced.
Quick-just-before-the-test-fix was to desolder the control
box's motor lead and put a small current meter in the
rotor's potentiometer line.
Max setting by a trimpot.
Minimum is pretty much zero.
Quick and easy but maybe a bit dirty solution that
became permanent on one rotor, other was fixed.
73,
Jukka OH6LI
> -----Original Message-----
> From: cq-contest-bounces@contesting.com
> [mailto:cq-contest-bounces@contesting.com]On Behalf Of ext Marco
> Sent: 09 January, 2005 14:59
> To: cq-contest@contesting.com
> Subject: [CQ-Contest] g800 problem
>
>
> Hi guys, I've got a problem with the control box of the Yaesu
> g800dxa rotor: beam is turning in both directions, but the
> indicator on the control box doesn't moves at all.
> Cables are ok.
> Any hint?
> What could be the problem?
> Thanks in advance.
> Marco - IK2XSL.
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|