My T2X and Ham IV rotor control boxes all use a 1819 bulb which is rated for
28 volts at .04 amps.
73 Pete - N8TR
At 06:18 PM 8/24/2007, Carol Richards wrote:
First of all, let me thank the numerous replies to my request. As
it turned out, Radio shack had them locally. Unfortunately, I
goofed. They are neither #47 nor #44 bulbs as I thought. They are
both 6.3v types. After the first replace went in and blew
immediately, (dummy me), I looked at the circuit and saw that it
was in parallel with the secondary of the meter transformer, before
any rectifiers. Thus the type of bulb I need is for AC and I would
suspect 18vac. There is a 13v zener that is used afterwards.
Of course, both the manual and the parts list for the ham-m don't
give any clue as to the type of transformer or the number of the bulb.
Any help out there?
Carol
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|